Stuttgart/Germany, January 25, 2012
Ecological life cycle assessment
The new B-Class with Environmental Certificate
The neutral inspectors at the TÜV Süd technical inspection authority have confirmed the high environmental compatibility of the new Mercedes-Benz B-Class, awarding the compact sports tourer the Environmental Certificate in accordance with ISO standard TR 14062.
This certification is based on a comprehensive ecological life cycle assessment of the B-Class, documenting every detail of ecological relevance.
Mercedes-Benz analyses the environmental compatibility of its models throughout their entire life cycle - from production through their long years of service to recycling at the end of their lives. This analysis goes far beyond the legal requirements. The Environmental Certificate and supplementary information are made available to in the "Life Cycle" documentation series. In addition to the B-Class, nine other model series from Mercedes-Benz have also received the Environmental Certificate from TÜV Süd.
Mercedes-Benz B 180 BlueEFFICIENCY  
Mercedes-Benz B 180 BlueEFFICIENCY
Over the entire life cycle of the Mercedes-Benz B-Class - from production and service over 160,000 kilometres to recycling - the new model in the guise of the B 180 BlueEFFICIENCY with 7G-DCT dual clutch transmission causes 16 percent less CO2 emissions than its predecessor when the latter was discontinued in 2011. The energy balance shows a similarly positive picture, with primary energy consumption over the vehicle's entire life cycle cut by 14 percent in comparison to its predecessor. This corresponds to the energy content of around 2400 litres of petrol.
The marked reductions in fuel consumption represent a substantial contributory factor here. By way of example, the fuel consumption of the B 180 BlueEFFICIENCY petrol model with dual clutch transmission ranges - depending on the fitted tyres - from 6.2 to 5.9 l/100 km combined in comparison to 7.5 to 7.3 l/100 km combined for its predecessor (at the time of its discontinuation in 2011) (CO2 emissions combined: 145 bis 137 g/km, energy efficiency class: C)*. This corresponds to a substantial reduction in fuel consumption of up to 19 percent. These fuel savings are ensured by an intelligent package of measures – the so-called BlueEFFICIENCY technologies. These include optimisation measures in the area of the powertrain, energy management, aerodynamics, tyres optimised for minimum rolling resistance, weight reduction through lightweight construction and driver information to encourage an energy-saving style of driving. An outstanding drag coefficient of Cd = 0.26 places the new B-Class at the forefront of its market segment.
The B-Class already meets the recycling rate of 95 percent by weight which will be mandatory as of 1 January 2015. In all, the B-Class incorporates 75 components representing a total weight of 39 kilograms which can be produced with the partial use of high-quality recycled plastics. This results in a 13 percent increase in the weight of approved recycled components in comparison to the previous model. Typical areas of use are wheel arch linings, cable ducts and underbody panels, which consist for the most part of polypropylene.
There is also an increased emphasis on closed automobile materials cycles: a recyclate is used for the front wheel arch linings, for example, which is produced from reprocessed vehicle components such as starter battery housings, bumper panels from the Mercedes-Benz Recycling System (MeRSy) and production waste from cockpit units.
21 components in the B-Class, representing a total weight of 20 kilograms, are produced using natural materials - an increase of 29 percent over the previous model. Natural materials employed in series production of the new B-Class consist primarily of coconut and wood fibres and honeycomb cardboard in combination with various polymer materials.
The modular body-in-white concept means that the B-Class is designed to accommodate versions with an alternative drive: appropriate interfaces in the body shell enable the main floor panel to be modified and a step to be produced for the "ENERGY SPACE" on the versions with alternative drive. An underfloor compartment covering part of the area under the rear bench seat offers space for alternative energy accumulators.
*The figures are provided in accordance with the German PKW-EnVKV and apply only to the German market. They do not concern an individual vehicle and are not part of the offer; they are provided solely for the purposes of comparison between different types of vehicles.
Tools & Services
© 2015 Daimler AG. All Rights reserved.  |  Provider  |  Legal Notices and Terms  |  Cookies  |   Privacy Statement

Usage of cookies

In order to optimize the website and for continuously improvement Daimler uses cookies. You agree to the usage of cookies when you continue using this site.